Safety and care

Your Sliders timer is a hand-built electronic device with a lithium battery inside. A few simple habits keep it, and you, safe for a long time.

Charge it switched off

Before plugging in the charger, set the power switch to OFF. Then plug the USB cable into the charging port. Switch it back on once it is unplugged.

Charging while the timer is switched on and running makes the charging circuit and the battery work at the same time as the displays, inside a closed case: that is how parts get hot. The timer is not designed for it.

Avoid leaving it fully lit for hours

All the displays lit at high brightness, non-stop, draw the most current. Our tests show little or no heating, but it happens more often in two cases:

  • when the battery is below 25 %;
  • when the timer is very bright and on non-stop.

It will not damage the circuit, but it is wise to avoid it as much as you can. You lose nothing by switching it off: the game goes on without it. Your countdown keeps running, your page keeps working, and the timer catches up when you switch it back on.

What helps

  • Switch it off when you don't need it: hold PWR 1.5 s.
  • Displays off while it keeps counting: GHI 4 (hold GHI 4 to wake them). They wake up by themselves before the end of a countdown.
  • Automatic sleep on battery after a few minutes without a key: options → SEt → SLP (or on your page, Customize this timer).
  • A lower brightness: options → SEt → brt. Below 25 % of battery, the timer dims itself; at 3 % it saves your game and switches itself off.
  • Charge it when it shows bAt LoU; don't wait for bAt CrIt.

In general

  • Don't open the case while it is switched on or charging.
  • Keep it away from water, direct sun on a hot day and heat sources.
  • If it ever gets hot to the touch, smells odd or the case swells: switch it off, unplug it, and contact us before using it again.